DV354
Owner’s Manual
Thank You!
Thank you for choosing a JENSEN product. We’ve tried to make the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use
all of the features of your new JENSEN DV354 Mobile Multimedia DVD/CD/MP3 Player for
maximum enjoyment.
MODE
VOL
VIDEO IN 2
L
AUDIO IN 2
R
Introduction ..................................................................................................................................... 2
Preparation...................................................................................................................................... 2
Installation...................................................................................................................................... 3
Wiring.............................................................................................................................................. 5
Controls and Indicators................................................................................................................... 7
Basic Operation ............................................................................................................................. 9
Disc Operation ................................................................................................................................ 9
Setup Menu................................................................................................................................... 13
Disc Symbols and Properties........................................................................................................ 14
Troubleshooting ............................................................................................................................ 15
Specifications................................................................................................................................ 16
Warranty........................................................................................................................................ 16
SEL
MUTE
DV354
CAUTION! Be careful not to damage the vehicle’s wiring.
Installation
DIN Front-Mount Installation
3. Place the unit in front of the dashboard opening so the wiring can be brought through the
mounting sleeve.
1. Use the supplied release keys to remove the half-sleeve from the unit.
4. Complete wiring connections (see “Wiring” on page 5).
5. After completing the wiring connections, turn the unit on to confirm operation (ignition switch
must be on). If unit does not operate, recheck all wiring until problem is corrected. Once the
unit is properly operating, turn off the ignition switch and proceed with final mounting of the
chassis.
6. Carefully slide the DVD player into the half-sleeve making sure it is right-side-up until it is fully
seated and the spring clips lock it into place.
NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 30°
of horizontal. Make sure the unit is mounted within this limitation.
M
O
D
E
V
OL
D
V
7. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the
chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure
part of the dashboard either above or below the unit using the screw and hex nut provided.
Bend the strap to position it as necessary.
D
/
CD
S
E
/
L
M
P3
PLA
YER
IR
M
UTE
V
ID
E
O
IN
2
L
A
U
D
IO
IN
2
R
CAUTION! The rear of the unit must be supported with the strap to prevent damage to the
dashboard from the weight of the unit or improper operation due to vibration.
8. Replace any items you removed from the dashboard.
2. Install the half-sleeve.
a. Install adapter if necessary (optional).
DIN Front-Mount Installation
b. Install half-sleeve into adapter or dashboard using the supplied screws. Do not force the
sleeve into the opening or cause it to bend or bow.
7
8
c. Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve.
With the sleeve fully inserted into the dashboard opening, bend as many of the tabs
outward as necessary to firmly secure the sleeve to the dashboard.
Install Half-Sleeve
2c
M
ODE
4
V
O
L
DV
D
/
C
D
SEL
/
M
P
3
P
L
A
Y
E
R
IR
M
U
T
E
2a
VIDEO
IN
2
L
A
UDIO
IN
2
R
3
2b
3
DV354
DIN Rear-Mount Installation
Removing the Unit
With some vehicles, you can use the screw holes located on both sides of the unit to fasten the
unit to the factory radio mounting brackets supplied with your vehicle. To install this unit using
factory mounting plates, perform the following steps:
1. Make sure the ignition is turned off, then disconnect the cable from the vehicle battery’s
negative (-) terminal.
2. Remove the metal strap attached the back of the unit (if attached).
3. Lift the top of the outer trim ring then pull it out to remove it.
1. Remove trim ring.
4. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then
pull the unit out of the dashboard.
NOTE: The outer trim ring, sleeve and the metal strap are not used for DIN rear-mount
installation.
2. Align the screw holes on the bracket with the screw holes on the unit, then tighten the screws
(5x5mm) on each side.
Removing the Unit
3. Reinstall the dash panel.
DIN Rear-Mount Installation
M
O
D
E
VOL
D
V
D
/
CD
S
E
/
L
MP3
PLA
YER
IR
MUTE
V
ID
E
O
IN
2
L
A
U
D
IO
IN
M
ODE
V
O
L
DV
D
/
C
SEL
D
/
M
P
3
P
L
A
Y
E
R
IR
M
U
T
E
VIDEO
IN
2
L
AUDIO
IN
2
2
R
1
3
Reconnecting the Battery
When wiring is complete, reconnect the battery negative terminal.
4
DV354
Wiring
Power/Accessory Connections
1. P.A. – Connect to PADIN4.
2. REMOTE CONTROL EXTENDER – Position extender where you are
likely to use the remote control. Point remote at eye to control the unit.
3. CONSTANT POWER WIRE (yellow) – Connect the 12V PLUS constant
power wire to a live 12 volt wire in the vehicle. Before making a
connection, check that the wire you intend to connect it to is always live,
even when the car’s ignition is turned off. If a live wire is not found, route
the wire to the car’s fuse block and connect it to a live circuit there.
4. ACC POWER WIRE (red) – Connect to a +12 volt circuit that is only live
when the ignition is on. The best connection point is at the car’s fuse block
at the “RADIO” or “ACCESSORY” identified terminals.
1
5. GROUND WIRE (black) – Securely fasten the Ground wire to a grounded
metal part of the car’s chassis. If you cannot find an existing bolt or screw
to fasten it to, drill a hole in the metal and secure it with a screw. To
ensure a good ground, remove any paint or grease from areas where the
wire will contact the surface.
6. DC12V OUT – Provides 12VDC at 300mA when DVD is on.
IR REMOTE CONTROL EXTENDER EYE
2
6
+
3
3A FUSE
YELLOW
4
BLACK
1A FUSE
5
RED
POWER WIRING HARNESS
5
DV354
Audio/Video Connections
NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging
the DVD player. The DV354 uses one 3 amp and one 0.5 amp ATC fuse, located in the black
filter boxes in-line with the power wires.
6
DV354
Controls and Indicators
The buttons located on the unit and the remote controls that perform the same function are
assigned the same number for reference on the diagrams and in the text.
Remote Control Operation
18
Front Panel Operation
POWER
EJECT
1
3
6
11
16
12
2
3
1
17
DISPLAY
REPEAT
MENU
PROGRAM
MUTE
MODE
ANGLE
ZOOM
11
22
23
25
26
21
SHUFFLE
A-B
SUBTITLE
19
20
MODE
SETUP
VOL
VIDEO IN 2
L
AUDIO IN 2
R
5
24
27
RESUME
AUDIO
SEL
MUTE
OK
29
30
10
33
TITLE
EQ
SEL
31
32
10
13
14
15
9
8
7
6
5
4
1
4
2
5
8
0
3
6
9
8
9
4
7
VOLUME
1. Power
36
2. Infrared Sensor
3. Eject
TRACK
7
35
34
28
4. Fast Forward/Advance Chapter
5. Stop
GOTO
SLOW
6. Pause/Play/Mute
7. Rewind/Previous Chapter
8. Volume Up
37
Using the Remote Control
9. Volume Down
10. Select
Point the remote control towards the player front face remote sensor IR (2). The operation angle is
approximately 30 degrees in each direction of the front of the remote sensor.
11. Mode
12. Disc Slot
13. Video In
14. Left Audio In
15. Right Audio In
16. Reset
7
DV354
Remote Control Functions
Changing the Battery
The remote control uses a CR2025 3V button cell lithium battery. The battery compartment is
located on the back of the remote control near the bottom edge. To replace the battery:
Ref # Button
Function
1
Turn the unit ON or OFF
/POWER
1. Open the battery compartment cover.
3
Eject the disc
2. Insert the new battery. Make sure that the positive and negative terminals of the battery are
oriented as indicated.
/EJECT
/TRACK
4
5
6
7
8
Skip to the next track/chapter
3. Close the cover.
Stop disc playback
Play/pause the disc (for disc play mode) and to mute the sound (for AV IN mode)
Go to previous track/chapter
/MUTE
/TRACK
Increase the volume level
/VOLUME
/VOLUME
9
Decrease the volume level
10
11
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
SEL
Select the desired adjustment mode. Press VOL+/- to change settings
Change between disc (DVD/VCD/CD/MP3) play mode and AV IN mode
Display statistical disc information during playback
Play tracks in programed order (MP3/CD)
MODE
DISPLAY
PROGRAM
SHUFFLE
REPEAT
A-B
Play tracks in random order (NOT for DVD)
Repeat current track/chapter
Repeat selected passage continuously
SUBTITLE
ANGLE
Change the SUBTITLE language on multi-subtitle language DVD discs
Change the viewing angle on multi-angle DVD discs
Display the root menu stored on DVD discs/Switch between PBC ON and PBC OFF on VCD discs
Display the SETUP menu
MENU/PBC
SETUP
ZOOM
Increase the picture size
RESUME
SLOW
Resume play from stopping point
Change to slow playback motion (VCD/DVD)
Select items left/right and ahead/back in menu mode
Confirm selection of track/chapter
,
,
,
OK
AUDIO
Change the AUDIO sound track on multi-audio sound track DVD discs. Change the sound mode of
VCD discs
32
33
34
TITLE
EQ
Display the TITLE menu stored on DVD disc
Select the equalization mode, such as FLAT, CLAS, POP, ROCK
Search in reverse rapidly
/TRACK
/TRACK
35
Search forward rapidly
36
37
0-9
GOTO
Enter track/chapter number directly. Use GOTO to search.
Used with numeric buttons to search disc
8
DV354
Basic Operation
Turning the Unit On/Off
Reset
The RESET button (16) is located on the front of the unit. You should engage the RESET button
only in the following situations:
Press the POWER button (1) on the front panel or remote control to turn the unit on/off.
Inserting a Disc
•
•
•
After initial installation when all wiring is complete
If all function buttons become inoperable
If an error symbol appears on the display
Insert a disc, label side up, into the disc slot (12). The player will start playback automatically.
Ejecting a Disc
To reset the unit, use a ballpoint pen or a thin metal object to depress the RESET button.
Press the EJECT button (3) to eject the disc from the slot. The unit does not have to be on to eject
a disc.
AV In Operation
NOTE: Do not drive with an ejected disc in the slot.
You can connect another audio/video system to the unit through the AV IN terminals on the back
(AV1 INPUT) or front panel (AV2 INPUT) of the unit. Once the device is connected, press the
MODE button (11) on the front panel or remote control to select “AV IN1” or “AV IN2” mode.
Audio Control
Volume
Press the VOL button (8) to increase the volume, or the VOL button (9) to decrease the
volume.
Disc Operation
Stopping Play
Mute
•
•
Press the stop button (5) on the front panel or remote control to stop disc play. Press the
button (6) to resume normal playback.
Press the MUTE button (6) to silence the audio. Press MUTE again to resume audio.
Press the SEL button (10) on the front panel or remote control to select the desired audio
adjustment mode. The adjustment mode will change in the following order:
Press the stop button (5) on the front panel or remote control twice to stop the playback and
return to the initial chapter.
Bass
Press SEL until “BAS” appears in the display. Press the volume buttons to adjust the Bass from +06 to -06.
Press SEL until “TRE” appears in the display. Press the volume buttons to adjust the Treble from +06 to -06.
Moving Through Chapters/Tracks
Treble
Press the
button (4) on the unit or remote control to advance to the next chapter/track.
Balance Press SEL until “BAL” appears in the display. Press the volume buttons to adjust the Balance from 12L to 12R.
Press the
button (7) on the unit or remote control to move to the previous chapter/track.
Setting the Clock
Fast Forward/Fast Reverse
Press and hold the DISPLAY button (17) on the remote until the clock display flashes, then
release. Next, press
Continue changing the hour to move between AM and PM.
(29) or
(7) to adjust the hour and
(29) or
(4) to adjust the minutes.
Press the
button (35) or button (29) on the remote control to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”, “8X” and “20X”. Press the button (6)
to return to regular play. Press and hold to fast-forward to a specific location, then release to begin
playback from that point.
Mode
Press the MODE button (11) on the front panel or remote control to switch between disc (DVD/
CVCD/CD/MP3) mode, AV IN1, and AV IN2 mode.
Press the
button (34) or button (29) on the remote control to fast reverse. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Press the button (6)
to return to regular play. Press and hold to fast-reverse to a specific location, then release to begin
playback from that point.
Equalization
Press the EQ button (33) on the remote control to activate the equalization function. Continue
pressing the EQ button to choose between the three equalizer modes (Clas, Pop and Rock) or to
turn the equalizer function off.
Slow Motion Play
Press the SLOW button (39) on the remote control during play to activate slow motion playback.
Each time the button is pressed, the speed changes as follows.
9
DV354
•
•
DVD: PLAY > SF 1/2X > SF 1/3X > SF 1/4X > SF 1/5X > SF 1/6X > SF 1/7X > SR 1/2X > SR
1/3X > SR 1/4X > SR 1/5 > SR 1/6X > SR 1/7X > PLAY
•
•
Press the A-B button again once you reach the desired end point (BRPT) of the repeated
section. The selected portion of the DVD will now repeat continuously.
Press the A-B button again to cancel the A-B section setting and stop repeat play.
VCD: PLAY > SF 1X > SF 2X > SF 3X > STEP BWD
Goto Search
Pausing Playback
During DVD or VCD playback, perform the following steps to use the GOTO feature to access a
specific location on a disc:
Press the
button (6) on the unit or the
button on the remote control during playback to
temporarily stop playback. To return to normal playback, press the
button again.
Title/Chapter Search
Repeating Playback
1. Press the GOTO button (37) button to search for a specific title/chapter. The following
Press the REPEAT button (20) on the remote control to select the repeat mode as follows:
DVD: CHAPTER REPEAT > TITLE REPEAT > REPEAT OFF
VCD/CD: REP-ONE > REP-ALL > REPEAT OFF
message appears on the display: TITLE 01/01 CHAPTER 01/10.
2. Use the numeric buttons (36) on the remote control to enter the desired title/chapter number,
then press the OK button (30).
Time Search
•
•
Select REP-ONE to continuously repeat the current chapter/track.
1. Press the button to search for a specific time.
Select REP-ALL to continuously repeat all chapters/tracks on the current disc. After playing
the last chapter/track, the unit will stop and display the elapsed time.
2. Use the numeric buttons (36) on the remote control to enter the desired title/chapter number,
then press the OK button (30).
NOTE: The REPEAT feature does not support VCD 2.0 (with PBC ON).
PBC On (CD/VCD)
PBC (Play Back Control) (VCD Only)
1. Press the GOTO button (37) to enter the exact time. The following message appears on the
display: GO TO -- : --.
For VCDs with play back functionality, play back control (PBC) provides additional controls for
VCD playback.
2. Use the numeric buttons (36) on the remote control to enter the time, then press the OK
button (30).
Press the MENU/PBC button (24) on remote control to toggle the PBC function “On”/”Off”. Once
PBC is on, playback starts from track one of the play list.
Playing in Programmed Order (CD/MP3/VCD with PBC OFF)
1. With play stopped, press the PROGRAM button (18) and the screen will display “PROGRAM
Zooming
P00:00”.
The Zoom function allows you to increase the picture size. Press the ZOOM button (26) on the
remote control to toggle from 2X to 3X to 4X scale and then to 1/2, 1/3 and 1/4 scale. When the
scale is 1/4X, press ZOOM again to select OFF and cancel the Zoom function.
2. Press the numeric button(s) (36) on the remote control to play the corresponding track in the
selection order. For example: press 4 to play track 4 first. “01:04” appears on the display.
3. If you want to complete program setting, press the
button (6) on the unit or the
button
During Zoom mode, press the arrow (
picture up, down, left, or right.
,
,
,
buttons) (29) or
/
buttons (34, 35) to move the
on the remote control to play the tracks in programmed order.
4. To stop programming tracks, press the
the AUTO PLAY function.
button twice (5), then press the
button to start
Random Play (CD/MP3/VCD Only)
Press the SHUFFLE button (19) on the remote control to select and play tracks in random order.
The display will show “SHF”. Press the button to begin the shuffled playback. Press the
SHUFFLE button again to turn SHUFFLE off.
On-Screen Display Function
Press the DISPLAY button (17) during playback to display the contents of the current disc on the
screen.
Sectional Repeat Function (A-B)
DVD
Use the A-B function to define a specific area of a disc to repeat.
1. Press DISPLAY for the first time:
•
Press the A-B button (21) on the remote control to set the start point (ARPT) of the repeated
TITLE 01/03 CHAPTER 002/025
00:02:25
section.
10
DV354
Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc
currently being played will be shown on the screen, along with the elapsed time.
SINGLE REMAIN
– 00:03:15
2. Press DISPLAY for the second time:
TRACK: 01/14
3. Press DISPLAY for the third time:
TOTAL ELAPSED
– 00:00:25
3. Press DISPLAY for the third time:
CHAPTER ELAPSED
– 00:00:24
TRACK: 01/14
4. Press DISPLAY for the fourth time:
4. Press DISPLAY for the fourth time:
TOTAL REMAIN
– 00:40:35
TITLE REMAIN
– 00:01:39
TRACK: 01/14
5. Press DISPLAY for the fourth time:
5. Press DISPLAY for the fifth time to clear the message on the screen.
TITLE ELAPSED
– 00:01:39
MP3
1. Press DISPLAY for the first time:
CHAPTER ELAPSED 00:00:25
6. Press DISPLAY for the sixth time to clear the message on the screen.
VCD
2. Press DISPLAY for the second time:
1. Press DISPLAY for the first time:
CHAPTER REMAIN 00:04:25
SINGLE ELAPSED
00:00:25
3. Press DISPLAY for the third time:
2. Press DISPLAY for the second time:
TOTAL ELAPSED
– 00:00:25
SINGLE REMAIN
– 00:03:15
4. Press DISPLAY for the fourth time:
3. Press DISPLAY for the third time:
TOTAL REMAIN
– 00:40:35
TOTAL ELAPSED
– 00:00:25
5. Press DISPLAY for the third time to clear the message on the screen.
4. Press DISPLAY for the fourth time:
Multi-Language Discs (DVD Only)
TOTAL REMAIN
– 00:03:15
Changing Audio Language
If you are watching a disc recorded in multiple languages, press the AUDIO button (31) on the
5. Press DISPLAY for the fifth time to clear the message on the screen.
remote control to choose a language. If no other languages are recorded,
left corner of the screen.
is displayed in the top
CD
1. Press DISPLAY for the first time:
Changing Subtitle Language
SINGLE ELAPSED
– 00:00:25
If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE
button (22) on the remote control to choose the language in which you would like the subtitles to
TRACK: 01/14
appear. If no other languages are available,
is displayed in the top left corner of the screen.
2. Press DISPLAY for the second time:
11
DV354
NOTE: During VCD playback you can press the AUDIO button (31) on the remote control
during playback to switch the sound between mono and stereo sound in the following
order: MONO LEFT > MONO RIGHT > STEREO.
Menu Function
Press the MENU button (24) on the remote control while the disc is playing to display the disc root
menu. You can navigate with the remote control navigation keys and select a feature with the OK
button (30) on the remote control.
Title Menu Function
If the DVD has multiple titles recorded on the disc, you can select a specific title from the title menu
from which to start playback.
1. Press the TITLE button (32) on the remote control during playback to display the title menu.
2. Select the preferred title using the remote control arrow keys (29) and confirm by pressing the
OK (30) button.
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different angles. For discs
recorded with multiple angles, press the ANGLE button (23) on the remote control to toggle
available angles of the on-screen image. If no other angles are recorded,
left corner of the screen.
is displayed in the top
•
•
•
Normal/PS (For 4:3 TV): Image is played back in the PAN SCAN style. (If connected to a
wide-screen TV, the left and right edges are cut off.)
Normal/LB (For 4:3 TV): Image is played back in letter box style. (If connected to a wide-
screen TV, black bands appear at the top and bottom of the screen.)
Wide (For 16:9 TV): Select this option when a wide-screen TV set is connected.
PIC Mode Setup
•
•
•
Select “AUTO” to allow the player to select the best setting for each disc.
Select “HI-RES” for the best possible image resolution.
Select “N-FLICKER” when the image has noise or distortion.
ANGLE MARK Display Setup
When set to ON while a multi-angle DVD disc is playing, the angle mark (
screen. When set to “OFF”, the mark does not appear.
) appears on the
CAPTIONS Setup
Set the CAPTIONS feature to “ON” to show captions (such as the actor’s dialogue) when a DVD
disc is playing. Set the feature to “OFF” if you do not want captions to appear.
SCR SAVER Setup
Turn the SCR SAVER function “ON” or “OFF”.
12
DV354
DVD SETUP MENU
During disc play, press the DVD SETUP button (29) on the remote control to access the SYSTEM
Table 1: System Setup Menu
SETUP menu.
RATING
1 KID SAFE
2 G
Select the appropriate rating level for the intended audi-
ence.
SYSTEM LANGUAGE AUDIO
You may override higher ratings by using your pass-
word.
3 PG
4 PG13
5 PG-R
6 R
TV SYSTEM
SCREEN SAVER
TV TYPE
7 NC-17
8 ADULT
RESTORE
DEFAULT
Select “Reset” to restore the factory default settings for
the Rating system only.
PASSWORD
RATING
LANGUAGE SETUP
DEFAULT
EXIT SETUP
OSD LAN-
GUAGE
ENGLISH
Select the appropriate on-screen language for the DVD
GERMAN
SPANISH
FRENCH
Use the
,
,
or
cursor buttons to choose between SYSTEM, LANGUAGE, or VIDEO
setup options.
PORTUGUESE
ITALIAN
Table 1: System Setup Menu
RUSSIAN
ENGLISH
GERMAN
SPANISH
SYSTEM SETUP
AUDIO LAN-
GUAGE
Choose from audio languages contained on the DVD If
you are watching a disc recorded in multiple languages
TV SYSTEM
NTSC
The color signals are output in the standard NTSC for-
mat.
NOTE: Languages are DVD dependent and not all lan-
guages may be supported.
PAL
The color signals are output in the standard PAL format.
AUTO
The color signal output is switched automatically based
on the current video input signal - NTSC or PAL.
FRENCH
PORTUGUESE
ITALIAN
SCREEN
SAVER
ON
Turn screen saver on/off.
OFF
RUSSIAN
TV TYPE
4: 3 PS
4:3 LB
16:9
With 16:9 display, the left and right sides are cut off.
With 16:9 display, the top and bottom are cut off.
Image is presented in wide view with a 16:9 aspect
ratio.
PASSWORD
_ _ _ _
Enter a 4-digit password to activate the “Rating” feature.
The original password is “0000”.
13
DV354
Table 1: System Setup Menu
Disc Symbols and Properties
SUBTITLE
LANG
ENGLISH
GERMAN
SPANISH
FRENCH
Choose the language you would like subtitles to appear
in (if available)
Table 2: Disc Properties
NOTE: Subtitles are DVD dependent and not all lan-
guages may be supported.
Symbol
12cm Disc Properties
Max Play Time
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)
PORTUGUESE
ITALIAN
RUSSIAN
OFF
(MPEG 1 Method)
74 minutes
Single side single layer (Video CD)
Single side single layer
Turn subtitles off
MENU LANG
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
Select the default language in which you would like the
DVD menu (if applicable) to be displayed.
74 minutes
74 minutes
Single side single layer
Table 3: DVD Disc Symbols
Meaning
Symbol
RUSSIAN
AUDIO SETUP
Number of voice languages recorded. The number inside the icon indicates the number lan-
guages on the disc (maximum of 8).
KEY
# (sharp) – b (flat)
Use the
/
cursor buttons to change pitch of audio.
Number of subtitle languages available on the disc (maximum of 32).
EXIT SETUP
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the
example on the left, the 16:9 video can be converted to Letter Box video.
Indicates the region code where the disc can be played.
•
•
•
•
Region 1: USA, Canada, East Pacific Ocean Islands
Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle East
Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia
Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean
Islands/Oceania
•
Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North
Africa, North-West Asia
•
•
Region 6: Mainland China
ALL: All regions
NOTE: The following types of discs will not play in this unit: DVD-ROM, DVD-RAM, CDV,
CD-G. DVD-R discs WILL play in this unit.
14
DV354
TROUBLESHOOTING
Problem
Cause
Corrective Action
Unit will not power on
Radio Fuse blown
Car battery fuse blown
Illegal operation
Install new fuse with correct rating
Install new fuse with correct rating
Press the RESET button located in the bottom right corner of the front panel
Replace battery with new one
Remote control does not function
Battery depleted
Battery installed incorrectly
Pirated disc is in use
Remove battery and install correctly
Use original copy
Poor sound quality or distortion
Unit resets itself when engine is off
Incorrect connection between ACC and positive battery
wire
Check wiring and correct
Cannot insert disc
Disc already inside unit
Disc is warped or scratched
Disc is dirty or wet
Eject current disc and insert new one
Use disc in good condition
Clean disc with soft cloth
Disc does not play back
Laser pickup is dirty
Clean laser pickup with cleaning disc
Use compatible disc
Incompatible disc is used
Disc region code is not compatible with unit
Disc is inserted upside down
Disc is illegally copied
Use disc with proper region code
Insert disc with label side up
Use original disc
Image blurred, distorted, or dark
PBC cannot be used during VCD playback
No repeat or searching while playing VCD
PBC is not available on the disc
PBC is on
Turn PBC off
•
•
The DVD player may not operate properly in extreme hot or cold. If such conditions occur,
allow the interior of the vehicle to reach a normal temperature before using player.
Care and Maintenance
•
Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A
rough cloth and non-neutral detergent (such as alcohol) may result in scratching or discolora-
tion.
When the vehicle warms up during cold weather or under damp conditions, condensation
may appear on the LCD panel. Should this occur, the screen will not operate properly until the
moisture has evaporated.
•
•
Do not get water or cleaning fluids on the unit.
•
We suggest you use a cleaning disc in this unit more frequently than in the unit in your home
due to the environmental conditions of the vehicle.
If the temperature inside the player gets too hot, a protective circuit automatically stops play
of the disc. If this occurs, allow the unit to cool before operating the player again.
•
•
Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism
can be damaged by foreign objects.
Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor,
as damage to the player and/or disc may occur. Such damage is not covered by the Warranty
on this product.
•
The ventilation should not be impeded by covering the ventilation openings with items such
as newspapers, table-cloths, curtains, etc.
15
DV354
Specifications
Limited Warranty
Supply Voltage: 12V DC (11V-15V), negative ground
Current Consumption: Less than 2A
Signal System: Composite video 1.0Vp-p 75ohms
Discs Played:
90 Day / 12 Month Limited Warranty
AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail
purchaser of this product that should this product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship within 90 days from the date of original
purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for
parts and repair labor. After the initial 90 day period and for a period of 12 months from the date of
the original purchase, the Company will supply at no charge a replacement for any defective
part(s).
1. DVD-VIDEO disc
•
•
5” (12 cm) single-sided, single-layer
5” (12 cm) single-sided, double-layer
2. Compact disc (CD-DA/CD-R/CD-RW/MP3)
3. 5” (12 cm) VIDEO CD
Audio Output Level: 10kohms (2 ch 2.0 Vrms)
Audio Signal Output:
To obtain repair or replacement within the terms of this warranty, the end user should contact the
O.E.M. The product is to be delivered to the OEM or original place of purchase, with proof of
warranty coverage (e.g. dated bill of sale, and serial number of the unit, and vin#), specification of
defect(s), transportation prepaid, to an approved warranty station. This warranty does not extend
to the elimination of externally generated static or noise, to the correction of antenna problems, to
costs incurred for removal or reinstallation of the product, or to damage to any tapes, cd's, dvd's,
speakers, accessories, or electrical systems. This warranty does not apply to any product or part
thereof which, in the opinion of the Company, has been damaged through alteration, improper
installation, mishandling, misuse, neglect, or accident. THE EXTENT OF THE COMPANY'S
LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE, AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT.
•
•
•
Frequency response: 20Hz~20kHz
S/N ratio: 80dB(JIS)
Wow and Flutter below measurable limits
This warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE
DURATION OF THIS WARRANTY. ANY ACTION FOR BREECH OF ANY WARRANTY
HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 30 DAYS FROM THE DATE OF ORIGINAL PURCHASE. IN
NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREECH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED
WHATSOEVER. No person or representative is authorized to assume for the Company any
liability other that expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
16
|